48
VQT3K69
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to
or
.
≥
Depending on the recording conditions, start time may be longer than 1 second.
≥
In the Quick power on mode, the zoom magnification becomes 1
k
.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened
or the viewfinder is extended.
≥
When in Quick start standby mode about 80% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥
Change the mode to
or
.
1
Set [
QUICK START
] to [
ON
].
2
Close the LCD monitor and retract the
viewfinder while the mode is set to
or .
The status indicator
A
flashes green and the unit
goes into Quick start standby mode.
≥
The lens cover does not close.
3
Open the LCD monitor or extend
the viewfinder.
The status indicator
A
lights red and the unit
is put into recording pause.
≥
Quick Start Standby Mode is canceled if
j
about 5 minutes have elapsed
j
mode is set to
≥
Depending on the recording conditions and menu settings, time for Quick start may be
longer than 0.6 seconds.
≥
It may take some time for Automatic white balance to adjust.
≥
In the Quick Start Mode, the zoom magnification becomes 1
k
.
≥
If [ECONOMY] (
l
47) is set to [5 MINUTES] and the unit automatically goes into Quick
Start Standby Mode, close the LCD monitor and viewfinder and then open the LCD monitor
or extend the viewfinder again.
≥
Turn the unit off using the power button.
≥
Quick start standby mode cannot be released by the remote control.
Please refer to page 53.
[QUICK POWER ON]
[OFF]/[ON]
[QUICK START]
[OFF]/[ON]
[REMOTE CONTROL]
[OFF]/[ON]
HDCTM900&HS900P&PC-VQT3K69_mst.book 48 ページ ２０１０年１２月１６日 木曜日 午後７時８分
