153
VQT3K69
on. The normal brightness will be restored
when the unit’s internal temperature rises.
After you have set up the face recognition
function, personal information will be held in
this unit and included in recorded images.
≥
When the unit is serviced, or given away/
disposed of, the personal information
should be deleted in the interests of
protecting personal information. (
l
99)
Indemnity
≥
Information, including personal
information, may be changed or lost as a
result of mistaken operation, static
electricity effects, accident, breakage,
repair or other handling.
It should be noted before use that
Panasonic does not accept any
responsibility for direct or indirect
problems which occur as the result of the
change to or loss of the information
including personal information.
When condensation forms on the unit, the
lens will cloud up and the unit may not work
properly. Make every effort to ensure that
condensation does not form. If it does form,
take the actions described below.
Causes of condensation
Condensation takes place when the
ambient temperature or humidity is
changed as follows.
≥
When this unit is brought inside from the
cold (e.g. a ski slope) to a warm room.
≥
When this unit is moved from an
air-conditioned car to outside.
≥
When a cold room has been warmed up
quickly.
≥
When cool wind from an air conditioner is
directly blown onto this unit.
≥
After rain showers.
≥
When this unit is in a very humid place
where the air is thick with steam. (e.g. a
heated swimming pool)
Helpful hint
If, for example, you have used this unit for
recording on a ski slope and are taking it into
a heated room, place the unit inside a plastic
bag, remove as much of the air from inside
the bag as possible, then seal the bag.
Leave the unit for about an hour in the room
so the temperature of the unit is close to the
ambient temperature of the room, then use
it.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
460,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
Extremely high precision technology is
employed to produce the viewfinder
screen featuring a total of approximately
263,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
About personal information
About condensation
HDCTM900&HS900P&PC-VQT3K69_mst.book 153 ページ ２０１０年１２月１６日 木曜日 午後７時８分
