background image

143

VQT3K69

Others

Troubleshooting

Power

Problem

Check points

This unit cannot be 
turned on.

This unit does not stay 
on long enough.

Battery runs down 
quickly.

Charge the battery again to ensure it is sufficiently 
charged. (

l

22)

In cold places, the battery using time becomes shorter.

The battery has a limited life. If the operating time is still 
too short even after the battery is fully charged, the 
battery has worn out and needs to be replaced.

This unit is turned off 
automatically.

If the unit turns off when you turn off the power to the TV 
using the TV remote control, the VIERA Link is at work. If 
you are not using the VIERA Link, set [VIERA Link] to 
[OFF]. (

l

107)

When this unit is connected to a DVD burner to copy or 
play back images (a disc is being accessed), the unit 
turns off automatically if the USB Connection Cable is 
removed.

This unit cannot be 
operated though it is 
turned on.

This unit does not 
operate normally.

Remove the battery or AC adaptor, wait about 1 minute 
and then reconnect the battery or AC adaptor. Then 
about 1 minute later, turn on the unit again. (Conducting 
the above operation while the media is being accessed 
may damage the data on the media.)

If normal operation is still not restored, detach the power 
connected, and contact consumer support. (

l

168, 169)

“ERROR OCCURRED. 
PLEASE TURN UNIT 
OFF, THEN TURN ON 
AGAIN.” is displayed.

The unit has automatically detected an error. Restart the 
unit by turning the unit off and on.

The unit will be turned off in about 1 minute if the unit is 
not turned off and on.

Repair is needed if it is repeatedly displayed even if it is 
restarted. Detach the power connected, contact 
consumer support. (

l

168, 169) Do not attempt to repair 

the unit by yourself.

HDCTM900&HS900P&PC-VQT3K69_mst.book  143 ページ  2010年12月16日 木曜日 午後7時8分

Summary of Contents for HDC-HS900K

















































































































































































Reviews: