84
VQT1T93
3
(Only when [SELECT] is selected in step 2)
Select the scene/still picture to
be deleted, then press the cursor
button.
≥
To unselect the scene/still picture, press the
cursor button again.
≥
Up to 99 scenes can be selected to be deleted.
4
(Only when [SELECT] is selected in step 2)
Press the
button.
≥
When the confirmation message appears,
select [YES], then press the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-4.
When you stop deleting halfway
Press the MENU button while deleting.
≥
The scenes or still pictures that have already
been deleted when the deletion is canceled
cannot be restored.
To complete editing
Press the MENU button.
≥
You can also delete scenes by pressing the
MENU button, selecting [EDIT SCENE]
#
[DELETE]
#
[ALL SCENES] or [SELECT].
≥
You can also delete still pictures by pressing
the MENU button, selecting [PICT. SETUP]
#
[DELETE]
#
[ALL SCENES] or [SELECT].
≥
When play mode is set to [INTEL. SCENE],
scenes cannot be deleted.
≥
To delete an unwanted part of a scene, divide
the scene first, and then delete the
unnecessary part. (
l
85)
≥
Scenes/still pictures which cannot be played
back (the thumbnails are displayed as
)
cannot be deleted.
≥
Do not open the SD card cover while deleting
motion pictures or still pictures on the SD card.
The deletion will stop.
≥
In case of [ALL SCENES], the deletion may
take time if there are many scenes or still
pictures on the SD card or HDD.
≥
Do not turn off this unit while deleting.
≥
When you delete scenes/still pictures, use a
battery with sufficient battery power or use the
AC adaptor.
≥
If you delete scenes recorded on other
products or still pictures conforming to DCF
standard with this unit, all the data related to
the scenes/still pictures may be deleted.
≥
When still pictures recorded on an SD card by
other products are deleted, a still picture (other
than JPEG) that cannot be played back on this
unit may be erased.
HDCHS100P-VQT1T93_ENG.book 84 ページ ２００８年７月１４日 月曜日 午後１時３６分
