60
VQT1T93
HD hi-speed burst
shooting
72 still pictures are recorded at a rate of 24 per second.
Use this function to record an object with fast movement.
≥
The Intelligent auto mode is set to [OFF]. (
l
51)
1
Select the menu. (
l
29)
[RECORD SETUP]
#
[HI-SPEED BURST]
#
[ON]
2
Press the
button.
≥
Up to 72 still pictures can be taken in burst mode. ([
] flashes in
red during recording.)
3
Select the setting to save with the cursor
button and press the cursor button.
[REC ALL]:
All pictures are stored.
[SELECT]:
Pictures in the selected range are stored.
[DEL ALL]:
No picture is stored.
≥
Select the thumbnail on the right bottom of the screen with the
cursor button and move the cursor button right to display the next
page.
4
(Only when the [SELECT] is selected)
Select the range of pictures that will be stored.
A
Start point
*
B
Finish point
* Only select the picture for start point if only 1 picture is to be
stored.
Confirmation message is displayed when [REC] is selected and the
cursor button is pressed after selecting the start point and the finish
point.
Select [YES] and press the cursor button.
Function
Effect/Setting method
HDCHS100P-VQT1T93_ENG.book 60 ページ ２００８年７月１４日 月曜日 午後１時３６分
