Panasonic HC-X909 Operating Instructions Manual Download

Page: 121 / 168

- 121 -

Connect the AC adaptor (supplied with DVD burner) to the DVD
burner.

≥

You cannot supply power to the DVD burner from this unit.

Connect this unit to the AC adaptor and change the mode to

Connect this unit to the DVD burner with the USB Connection Cable
(supplied with DVD burner).

USB Connection Cable (supplied with DVD burner)

DVD burner (optional)

≥

Insert the plugs as far as they will go.

Insert the disc in the DVD burner.

≥

Insert the DVD disc with the recording side down when using the DVD burner.

Touch the desired item.

[BURN DISC]:

Refer to page 122 for how to copy discs.

[PLAY DISC]:

Refer to page 125 for how to play back the copied discs.

To terminate the connection with the DVD burner

Touch [EXIT].

≥

Disconnect the USB Connection Cable from this unit.

HC-X900&X900M&X800EP-VQT4D01_mst.book 121 ページ２０１２年１月１２日　木曜日　午前１０時４４分

Summary of Contents for HC-X909









































































































































































Search results

Summary of Contents for HC-X909

Reviews:

Related manuals for HC-X909

Brands by name

Popular brands

Panasonic HC-X909, Operating Instructions Manual

Search results

Summary of Contents for HC-X909

Reviews:

Related manuals for HC-X909

Brands by name

Popular brands