background image

- 123 -

About recording formats when copying motion pictures

[High Definition]:

The scenes recorded in 1080/50p or AVCHD 3D by this unit will be copied after 
converting to 1080/50i picture quality.
The scenes recorded in 1080/50i format will be copied as high definition picture quality 
as recorded.

When copying scenes recorded in 1080/50p or AVCHD 3D, select the recording 
picture quality ([HA]/[HG]/[HX]/[HE]).

[Standard] ([XP]/[SP]):

Images are converted into the original standard picture quality and then copied.

Since [XP] has a higher picture quality compared to [SP], the data capacity becomes 
large so that you may need more discs for copying than [SP].

Before you delete the data on the media after copying is complete, be sure to play 
back the discs to check that they have been copied to correctly. (

l

125)

Important Notice

When connecting an optional DVD burner and this unit for copying a disc, do not 
insert a disc with recorded motion pictures in high definition picture quality into 
devices that do not support the AVCHD format. In some cases the disc may get 
stuck in the device. The disc will not play back on devices that do not support the 
AVCHD format.

When inserting a disc containing recorded motion/still pictures into other 
devices, a message prompting you to format the disc may be displayed. Do not 
format the disc, since deleted data cannot be restored later.

HC-X900&X900M&X800EP-VQT4D01_mst.book  123 ページ  2012年1月12日 木曜日 午前10時44分

Summary of Contents for HC-X909









































































































































































Reviews: