Panasonic HC-W850, Operating Instructions Manual

Page: 209 / 229

- 209 -
Colour or brightness of
the image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
≥ Colour or brightness of the image may change, or you may
see horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ In Motion Picture Recording Mode, record in Intelligent Auto
Mode/Intelligent Auto Plus Mode or set the shutter speed to
1/100 in areas where the power supply frequency is 50 Hz, or
1/125 in areas of 60 Hz.
≥ In Still Picture Recording Mode, this will not affect the
recorded image.
≥ In FULL HD Slow Motion Mode, setting the shutter speed to
1/100 seconds reduces the intensity of the problem.
Playback
Problem Check points
Scenes/still pictures
cannot be played back. ≥ Any scenes/still pictures where the thumbnails are displayed
as
cannot be played back.
Scenes cannot be deleted.
≥
Release the protect setting. (
l
114 )
≥ Any scenes/still pictures where the thumbnails are displayed
as
cannot be deleted. If the scenes/still pictures are
unnecessary, format the media to erase the data. ( l 41 )
Please be aware that if a media is formatted then all the data
recorded on the media is erased and cannot be recovered.
Back up important data on a PC, disc etc.
With other products
Problem Check points
Even when this unit is
correctly connected to a
TV, images or sounds are
not output.
The images are squeezed
horizontally.
≥ Please read the operating instructions of your TV and select
the channel that matches the input used for the connection.
≥ Change the [TV ASPECT] setting to match the aspect ratio of
the TV. (
l
120 )
≥ The audio during playback mode is not output from this unit
when connected to a TV. Sound levels cannot be adjusted
using this unit, so adjust the sound on the TV.
Even when this unit is
connected to the TV by the
HDMI mini cable, images
or sounds are not output. ≥ Check if the HDMI mini cable is connected correctly.
≥
Insert the HDMI mini cable all the way in.
If the SD card is inserted in
another device, it is not
recognised.
≥
Check that the device is compatible with the capacity or type
of SD card (SD Memory Card/SDHC Memory Card/SDXC
Memory Card) that you inserted. Refer to the operating
instructions of the device for details.
Recording
Problem Check points