- 159 -
Playing back on a TV
You can play back the scenes and still pictures recorded with or stored in this unit on a TV.
≥
The following scenes can be played back:
j
Scenes recorded in AVCHD
j
Scenes recorded in MP4/iFrame [720]
j
Scenes saved in MP4 (High Quality) or MP4 (Low Quality)
1
Press Wi-Fi button and touch [DLNA Play].
≥
If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
≥
If you touch [CANCEL], the Wi-Fi connection is cancelled.
≥
When the connection is complete, the screen of this unit turns off. To display it again, touch the
screen.
2
Select this unit (SSID) by the TV side.
≥
Select the media ([SD/MEM]) and select the motion picture ([AVCHD/MP4]) or still picture
([JPEG]) to play back.
3
Perform playback operations with the TV remote control.
≥
Playback operations may differ depending on the TV in use.
≥
The following operations can be performed if a colour button
is pushed.
Blue/Red: Skip playback
≥
Fast forward/Fast rewind playback cannot be performed.
≥
You cannot perform playback operations with this unit.
To exit [DLNA Play]:
Touch [EXIT] or press Wi-Fi button.
≥
A message is displayed. Touch [YES] to exit.
≥
Scenes recorded in the following [REC MODE] can not be played back:
j
MP4/iFrame: [1080/50M]/[1080/28M]/[iFrame]
≥
Depending on your environment, such as the network condition, scenes may not be played back
smoothly.
(Examples of operations during
motion picture playback)
A
Skip playback
B
Stop
C
Playback/Pause
