- 87 -
≥
The peaking display is not displayed if [MF ASSIST] is [OFF].
≥
The peaking display does not get displayed in the images that are actually recorded.
≥
(For the
series/
series)
The amount that focus moves when you rotate the Manual ring can be changed by setting
[FOCUS RING SETTING]. (
∫
To change the peaking display colour
(
series/
series)
Select the menu.
When recording with a [REC FORMAT] setting of [4K MP4] or [24p] (and with a [REC MODE]
setting of [2160/24p]), you can magnify the screen to adjust the focus.
It is also possible to change the magnification window’s magnification level and position.
≥
If [MF ASSIST] is [ON], the peaking display is displayed on the part focused.
≥
The screens below are examples when using
series.
≥
Set [REC FORMAT] and [REC MODE] as follows, or set the Recording Mode to 4K Photo
Mode.
s
Set [REC FORMAT] to [4K MP4].
s
Set [REC FORMAT] to [24p], and [REC MODE] to [2160/24p].
≥
Change to Manual Focus. (
The in-focus area is displayed in blue. (Peaking display)
The normal screen returns approximately 2 seconds after
you finish bringing the subject into focus.
≥
To restore Auto Focus, touch [AF] in Step 2 or change
the Recording Mode to the Intelligent Auto Mode. (
A
Peaking display
: [RECORD SETUP]
#
[PEAKING COLOUR]
#
desired setting
[Red]/[Blue]/[Yellow]/[White]
series/
series/
series
Using the Focus Expand function
(Between 3
k
and 5
k
)
(Between 5.5
k
and 10
k
)
A
Magnification window
B
[EXIT]
C
Zoom position window
D
[EXIT]
FOCUS
WB
SHTR
IRIS
MNL
WXF1
VXF1
WXF1
VXF1
MENU
WXF1
VXF1
VX1
VX1
3.0X
3.0X
3.0X
5.5X
5.5X
5.5X
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 87 ページ 2018年2月22日 木曜日 午後12時30分