- 205 -
Broadcasting live
≥
Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in
[Wi-Fi Setup] (
to
).
1
Press Wi-Fi button on this unit.
2
Touch [Live Cast] on the Wi-Fi menu screen.
≥
If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them
according to the screen.
≥
You can register up to three wireless access points. When connecting to a wireless access point,
this unit will try to connect to wireless access points one after the other. For example, if it fails to
connect to the first one, it will try to connect to the second one. (
)
≥
If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
≥
When the connection is made correctly, the screen of this unit switches to the Live Cast Mode.
∫
To send e-mails
You can send e-mails containing such information as the USTREAM channel name or the
scheduled broadcast date.
≥
This unit can only set the scheduled broadcast date. (
) For other settings, set them on the
“LUMIX CLUB”.
≥
On the “LUMIX CLUB”, register the destination addresses of the e-mail in advance.
∫
To start the live broadcast
∫
To stop the live broadcast
Touch
.
≥
When
(grey) is displayed, unsent data is present. Wait until the unsent data is sent and
is
displayed.
To exit the Live Cast Mode:
Touch [EXIT] or press Wi-Fi button.
≥
A message is displayed. Touch [YES] to exit.
Touch
.
≥
/
/
will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
A
[EXIT]
R 1h20m
R 1h20m
R 1h20m
Touch
.
≥
If you press the start recording button, you can
simultaneously record the broadcast to this unit. The Backup
for Twin Camera function is not available.
≥
/
/
will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
A
[EXIT]
R 1h20m
R 1h20m
R 1h20m
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 205 ページ ２０１８年２月２２日 木曜日 午後１２時３０分
