Panasonic GT series, Manual

Page: 74 / 136

5-2
5.1 Siemens S7-200 Series
PLC model selection
Select "Siemens S7-200 series".
Usable devices
Bit/Word Device No. Memo
Bit Device
Input I00-I77
Output Q00-Q77
Bit Memory M00-M317
Timer(contact) T00-T255
Counter(contact) C00-C255
Special Memory SM00-SM1947
Sequence Control Relay S00-S317
Word Device
Input IW0-IW6 Address should be an even number
Output QW0-QW6 Address should be an even number
Bit Memory MW0-MW30 Address should be an even number
Timer(current) T0-T255 Address should be an even number
Counter(current) C0-C255 Address should be an even number
Special Memory SMW0-SMW193 Address should be an even number
Sequence Control Relay SW0-SW30 Address should be an even number
Variable Memory VW0-VW5118 Address should be an even number
The following list illustrates each expression of PLC device in GTWIN.
When you enter a value of devices, follow below expression.
Expression in PLC Expression in GTWIN
Bit Device Q3.2 Q3-2
Word Device VW100 VW100
Communication Parameters Settings
The example of communication settings of GT and PLC is shown below.
Setting Values for GT
Item Setting
GT Unit No. 01
PLC Unit No. 02
Baud Rate 9600bps
Data Bits 8
Stop Bits 1
Parity Even
Setting Values for PLC
Item Setting
PLC Unit No. 02