27
[DTL MODE] Specifies the details.
The band and level of the edge correction are specified.
“SCENE FILE” screen
** SCENE FILE 1 ** P1
LABEL:................
DTL MODE *MANU
RED DTL OFF
GAMMA ....
|
.... 45
KNEE *MANU
BLACK STRETCH OFF
D-RANGE NORMAL
WHITE CLIP ........
|
109
RET END
“DTL MODE” screen
** DTL MODE **
PATTERN USER
DTL BAND . . . .
|
4
−
+
DTL LEVEL ....
|
.... 16
−
+
RET END
Step 1
Move the cursor to “DTL MODE” of the
“SCENE FILE” screen and press the [SEL] but-
ton.
The “DTL MODE” screen appears.
A
Step 2
Move the cursor to “PATTERN”, select a pat-
tern from among “1”, “2” and “3” and press
the [SEL] button.
The setting contents of “DTL BAND” and
A
“DTL LEVEL” are applied to “USER”.
The band and level can be manually adjusted
in “USER”. Perform adjustment on an as
needed basis. Be sure to view a monitor when
the adjustment is performed.
Note:
The band and level can also be adjusted
•
directly without applying any of the pat-
terns, “1”, “2” and “3” to “USER”.
Step 3
Move the cursor to “DTL BAND” and use the
[
e
] or [
f
] button to select the band of the
edge enhancement.
When the level indicator moves in the “+”
direction, the edge becomes thinner (the band
becomes higher). When the level indicator
moves in the “–” direction, the edge becomes
thicker (the band becomes lower).
Step 4
Move the cursor to “DTL LEVEL” and use the
[
e
] or [
f
] button to select the level of the
edge enhancement.
When the level indicator moves in the “+”
direction, the image becomes sharper, and
when the level indicator moves in the “–” direc-
tion, the image becomes softer.
Note:
Jaggies may appear on the edge of a
•
photographic subject, but this phenome-
non is not abnormal. If this phenomenon
is not favorable, decrease “DTL BAND” or
“DTL LEVEL” to adjust the image quality.
