17
How to mount lens
Important:
A lens whose projection length of the lens mount section is 7 mm
•
or less shall be used.
The recommended lens aperture ranges from F2.8 to F16.
•
Selection of less than F2.8 of the lens aperture may result in image
blurring.
When a zoom lens is used, focus adjustment method varies with
•
the lens. For further information, refer to the operating instructions
for the lens.
When the lens is removed, be sure to put the cap on the lens mount section of the camera
•
head.
Securing the lens excessively to the lens mount may deviate the back focal length.
•
Do not loosen the fixing screw on the side of the lens mount. The adjusted back focal length
•
may deviate.
Step 1
Remove the cap from the lens mount section
of the camera head.
Important:
Check to see whether the surface of the
•
optical filter is clean before mounting a
lens. If the surface is dirty, use a blower
brush for general camera to remove dust.
Step 2
Turn a C-mount lens clockwise to engage the
lens with the lens mount section.
Recommended lenses (As of February, 2012)
Manufacturer
Model
FUJIFILM
DF6HA-1B
FUJIFILM
HF9HA-1B
FUJIFILM
HF12.5HA-1B
FUJIFILM
HF16HA-1B
FUJIFILM
HF25HA-1B
FUJIFILM
HF35HA-1B
FUJIFILM
HF50HA-1B
C mount:
7 mm or less
