1.3 Accessories
9
Installation Guide (this document)
1 (*)
Rubber
foot
4
Rack mount bracket (for 19-inch rack
）
2
(**)
Connection bracket (for connection two Ethernet Switches)
2 (**)
Screw
（
for 19-inch rack
）
4
(**)
Screw (for fixing the mount brackets to the Ethernet Switch)
8 (**)
Screw (for fixing the connection bracket)
8 (**)
Power
cord 1
* Just the PN25048-TH has 1 Installation Guide in Thai (a total of 2 guides).
**
Includes PN25048-NZ only.
Please be sure to confirm the content.
Please contact our distributor if any of the contents are insufficient.
1.4 Basic operation
This Product does not have a power ON/OFF switch. Connect the supplied power
cord to this Ethernet Switch and connect the other end into an electric outlet.
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).
When power is supplied, all the LEDs are turned ON.
Subsequently, the POWER (power) LED lights up green, and the STATUS (status) LED
lights up orange and the hardware runs a self-diagnostic.
When it is finished, both the the POWER (power) LED and STATUS (status) LED light
up green, and it operates as a Ethernet Switch.
As this Ethernet Switch succeeds in communicating with a terminal connected to
each port, LED of the port lights up.
When the terminal is not operating normally, for example when power is not
supplied to the terminal, LED is not lighted.
Quantity
[Power Cord]
The following power cords are supplied as per the intended nation of delivery.
Locale
Thailand
250 VAC 6 A
TIS166-2549
-
Indonesia
250 VAC 10 A
250 VAC 10 A
250 VAC 5 A
CEE7/7
BS1363
BS1363
-
13 A
5 A
Malaysia
Singapore
Product Number
PN25048-TH
PN25048-ID
PN25048-MY
PN25048-SG
250 VAC 10 A
AS/NZS 3112
-
Australia
New Zealand
PN25048-NZ
Power Cord Rating FUSE Rated Current
Plug Type
* For configuration and management methods, please see the PDF
version of the Operating Instructions on Panasonic's website.
