http://cxema.ru
5. (Figure 13) Select VIEW TRIM PL MCH, and make a note of this value.
Figure 13:
Power level view 2
600-0724
6. Perform the following calculation:
Set RGAIN - PL% = Value recorded in step 5 (± change in PL to meet specified value for change per dB). Make a
note of the result.
7. (Figure 14) At the Channel box press F6 to program the TRIM for the mid-channel.
Figure 14:
Power level selection 1.
600-0725
Figure Power level selection 1.
8. (Figure 15) Select PROGRAM TRIM PL MCH.
Figure 15:
Power level selection 2.
600-0727
MCUK980101C8
Section 7
Issue 1
Service Manual
7 - 11
Revision 0
TEST AND MEASUREMENT