http://cxema.ru
9. (Figure 16) Highlight the PL5 field and press ENTER.
Figure 16:
Power level selection 3.
600-0728
10. Enter the value calculated in step 6 into the data field and then press ENTER.
11. Press ESC.
12. At the GSM test unit re-measure the peak power.
13. Repeat steps 2 to 11 of this procedure for power levels PL6 to PL19.
14. After calibrating at channel 62, the carrier power must be measured and calibrated at low and high channels for
power levels 5 to 19.
15. Repeat step 2 to 14 for the Ni-MH battery settings.
Issue 1
Section 7
MCUK980101C8
Revision 0
7 - 12
Service Manual
TEST AND MEASUREMENT
