Hand Strap
Model No.: FZ-VSTM11U/FZ-VSTM12U/FZ-VSTM11AU/FZ-VSTM12AU
Attaching the hand strap helps you stably hold the computer.
The following descriptions are for FZ-VSTM12U/FZ-VSTM12AU with a rotating handle and FZ-VST11U/FZ-VSTM11AU with a fixed handle. Illus-
trations of FZ-VSTM12U are used.
Installing the hand strap
C A U TI O N
n
Place the computer on a soft cloth with the panel side down. In addition, make sure that there is no item under the computer.
1.
Pass the belt which has an adjuster (A) through the strap hole located on the left side of the back of the computer.
2.
Pass the belt through the adjuster and securely tighten it so it does not loosen.
<Only for FZ-VSTM12U/FZ-VSTM12AU> Insert the tip of belt into the cut hole of the hand strap.
3.
Pass the belt which has the Velcro straps through the strap hole located on the right side of the back of the computer.
4.
Securely attach the bonded part of the belt so it does not loosen.
<Only for FZ-VSTM12U/FZ-VSTM12AU> Insert the tip of belt into the cut hole of the hand strap.
-
102
-