Fan
Receptacle
Fig. 7
Thumb screw
Fig. 6
Ceiling joist
Claws
Adapter slots
Fan body
Adapter
Fig.5-5
Fig. 5-2
Fan body
Fig. 5-1
Adapter
When mounting
body and blower
separately
9. Connect plug connector to receptacle.(Fig.8)
Make sure that body "Claws" are property inserted into adaptor
slots.
IMPORTANT:
INSTALLATION
I
(
JOIST MOUNTING
)
CONTINUED
INSTALLATION
I
(
JOIST MOUNTING
)
CONTINUED
6. Remove ceiling section. (Fig.4)
7. Insert fan body into ceiling. (Fig.6)
8. Secure fan body to adaptor using two thumb screws.(Fig.7)
1.Loosen 4 screws (but do
not remove them from
blower).(Fig.5-1)
2. Remove blower section.
3.Remove adaptor from
fan body and secure to
ceiling joists as in Fig.2
4.Insert fan body (without
blower section) into
ceiling.(Fig.6)
5.Secure the adaptor and
fan body using one thumb
screw as shown in Fig.5-3.
6.Secure the fan body to
the ceiling joists as shown
in Fig.9 and Fig.10 of
page 8.
7.Insert the blower into the
fan body.(Fig.5-4)
8.Secure the blower by 4
screws as shown in
Fig.5-5.
9.Mount the fan body with
thumb screw (on the right
side of bottom of the
adaptor) as shown in
Fig.7.
(Fig.5-2)
of page 6.
Screw
Blower
Fan body
Fig. 5-3
Ceiling joist
Fan body
Ceiling joist
Fig. 5-4
Screw
Screw driver
Ceiling
Ceiling joist
260 (10
1/
4)
mm (inches)
260 (10 1/
4)
Fig.4
Plug connector
Fig. 8
