2-Screws
Clamp plate
Ceiling joist
Fig. 21
Fig. 19
2-square knock-out
Secure the fan body to the adaptor by using one thumb screw
as shown in Fig.21
Insert fan body into ceiling as shown in Fig.20.
Remove the 2 square knock-out carefully from surface
of the frame by screw driver ( Fig.19) .And remove the
bracket cover on the other side of the frame body.
Replace with clamp plates(accessories) and secure the fan
body on ceiling board with 2 screws from inside of the frame.
(Fig.22)
INSTALLATION
III
(IN EXISTING CONSTRUCTION) CONTINUED
Hand driver
Fan body
Adapter slots
Claws
Fig. 20
Ceiling
Body
Fan body
Ceiling
Fig. 22
