Grille
Glove
Grille
Slot
Mounting
spring
CAUTION:
Disconnect power source before working on unit. Routine
maintenance must be done every year.
WARNING:
MAINTENANCE
MAINTENANCE
Mount the fan body with thumb screw (on the right side of
bottom of the adaptor) as shown in Fig.7 of page 7.
Fig. 24
Screw driver
Ceiling
Blower
Ceiling
Fan body
Fig. 23
Screw
INSTALLATION
III
(IN EXISTING CONSTRUCTION) CONTINUED
Connect plug connector to receptacle.(Fig.8 of page 7.)
Secure blower to fan body with screws that were loosen
before.(Fig.24)
Insert the blower into the fan body.(Fig.23)
Insert mounting springs into slots as shown and mount grille to
fan body.(Fig.11 of page 8.)
1. Never use petrol, benzene, thinner or any other such
chemicals for cleaning the ventilating fan.
2. Do not allow water to enter motor.
o
O
3. Do not immerse resin parts in water over 60 C (140 F).
1. Remove grille. (Squeeze mounting spring and pull down
carefully.) ( Fig.25)
2. Wash and clean grille.(Use non-abrasive kitchen detergent,
wipe dry with new cloth.) (Fig.26)
Fig. 25
Fig. 26
