manualshive.com logo in svg

Panasonic FP7 Series, Command Reference Manual

The Panasonic FP7 Series is a cutting-edge electronic device that requires a User Manual for optimal usage. To assist you in maximizing its features, we offer a downloadable and free manual on our website. Get the most out of your Panasonic FP7 Series by accessing the User Manual at manualshive.com.

Share
Download
background image

● The instruction can be executed when the transfer request relays of the FTPc control relay

and the FTPc logging/trace control relay are OFF (0: No request). As an execution condition

of the instruction, insert a program that checks the state of the transfer request relay. The

states of the transfer request relay and the logging transfer request relay can be read with

the ETSTAT instruction. Store the state that is read in a device such as an internal relay. An

operation error occurs if the instruction is executed when one of the transfer request relays is

ON.

● After this instruction is executed, the PLC operates as shown in the following table.

Conditions

Operation

The power supply for the PLC is switched from OFF to ON.

Setting using the
configuration

The PLC is changed to
PROG mode.

Changes to RUN mode without rewriting the
configuration.

Setting using instructions

Changes to RUN mode after rewriting the
configuration.

Setting using the
configuration

● If an incorrect IP address is specified, the system relay SR9 (carry flag CY) is set and the

instruction is terminated without being executed.

● This instruction can be executed when the Ethernet initialization active flag (X61) is OFF. As

an execution condition of the instruction, insert a program that checks the status of the flag

(X61). If this instruction is executed when the flag (X61) is ON, the system relay SR9 (carry

flag CY) is set and the instruction is terminated without being executed.

● When the instruction is completed successfully, the system relay SR9 (carry flag CY) and the

system data register SD29 (Ethernet communication error code) are cleared.

■

Precautions for programming

● Insert the UNITSEL instruction immediately before this instruction and specify the unit (built-

in ET-LAN in the CPU unit) and the connection number.

● For [S1] to [S3], specify the starting address of the device area that stores the string data

that indicates the set parameters, or a character constant. When specifying a device area for

an operand, set string data using the SSET instruction in advance. However, the ESSET

instruction cannot be used because the format is different. The number of characters should

not exceed 256.

● Both upper and lower case characters can be used. "Abcd", "ABCD" and "abcd" are all

synonymous. "Abcd", "ABCD" and "abcd" are all synonymous.

● This instruction is not available in interrupt programs.

■

Operand [S1] setting

● Specify the starting address storing the server specification parameter or a character

constant.

● A part of parameters can be omitted. The settings are not changed when parameters are

omitted partially.

● When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
● When omitting the part after a specified keyword, omit both "," and "keyword".
● Specify the FTP server setting from SV0 in order. When the right order is skipped, an error

occurs. It is possible to specify when the setting has been already registered.

● Only one server can be specified at the same time.
● Specify an FTP server number, the IP address or host name of an FTP server, a port

number, an open method, and the SSL3/TLS1 authentication setting within 256 one-byte

characters in total.

17.11 FTPcSV (FTP Client Connected Server Setting)

WUME-FP7CPUPGR-12

17-53

Summary of Contents for FP7 Series







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FP7 Series

Magnat Audio MC 200 Faq preview
MC 200
Brand: Magnat Audio Pages: 2
H3C H3C S7500E Series Instruction Manual preview
H3C S7500E Series
Brand: H3C Pages: 34
H3C SR8800 IM-FW-II Manual preview
SR8800 IM-FW-II
Brand: H3C Pages: 5
H3C H3C S7500E Series Installation Manual preview
H3C S7500E Series
Brand: H3C Pages: 50
Lattice Semiconductor ECP5 Versa Quick Start Manual preview
ECP5 Versa
Brand: Lattice Semiconductor Pages: 15
Dahua Smart 1U Quick Start Manual preview
Smart 1U
Brand: Dahua Pages: 24
Dahua NVR2104-S2 Quick Start Manual preview
NVR2104-S2
Brand: Dahua Pages: 6
hawa HAWA-Frontside 60/B Planning And Installation Instructions preview
HAWA-Frontside 60/B
Brand: hawa Pages: 28
3Com Token Ring Getting Started Manual preview
Token Ring
Brand: 3Com Pages: 18
Supermicro SC836 X9 User Manual preview
SC836 X9
Brand: Supermicro Pages: 24
8e6 Technologies ER3-100 (5K02-55) Quick Start Manual preview
ER3-100 (5K02-55)
Brand: 8e6 Technologies Pages: 74
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Brand: Buffalo Pages: 71
Intel RS25AB080 Tested Hardware And Operating System List preview
RS25AB080
Brand: Intel Pages: 26
ORiNG PCard-E 021L-D5 Series Quick Installation Manual preview
PCard-E 021L-D5 Series
Brand: ORiNG Pages: 2
TDK HHM Series HHM2409 Specifications preview
HHM Series HHM2409
Brand: TDK Pages: 2
Advantech PPC-3211W User Manual preview
PPC-3211W
Brand: Advantech Pages: 66
PairGain T1L2PY0AA Manual preview
T1L2PY0AA
Brand: PairGain Pages: 80
Air Live AirVideo-100 Quick Setup Manual preview
AirVideo-100
Brand: Air Live Pages: 2

Brands by name

Popular brands

Load more brands