Panasonic FL360 - DMW - Hot-shoe clip-on Flash, Operating Instructions Manual

Page: 9 / 196

9
VQT1B11
∫
Batteries with shapes that
cannot be used
≥
Installing batteries with irregular
shapes in the unit may cause
electrolyte leakage, heat
generation and even rupturing of
the batteries themselves.
≥
Some batteries sold on the market
have part or all of their jackets
missing: Under no circumstances
should such batteries be used.
(Refer to the figure below.)
∫
Handling the batteries
Mishandling of batteries may cause
electrolyte leakage, heat generation
and even rupturing of the batteries
themselves. Heed with the following
cautions.
≥
Batteries (bare batteries) with no
external jackets or batteries with
parts of their jackets missing
≥
Batteries whose
-
electrode is
flat
≥
Do not expose batteries to water
or seawater or allow their
terminal areas to become wet.
≥
Do not remove their external
jackets or damage them in any
way.
≥
Do not drop the batteries, knock
them into other objects or subject
them to any other kind of strong
impact.
≥
Stop using the batteries as soon
as you notice any electrolyte
leakage, deformation,
discolouration or any other such
trouble.
≥
Do not store batteries in locations
where the temperature and/or
humidity levels are high.
≥
Keep batteries out of the reach of
infants and small children.
≥
Always use 2 new batteries of the
same type when replacing
batteries.
VQT1B11.book 9 ページ ２００６年８月３１日 木曜日 午後４時３６分