20
VQT1B11
Press the [MODE] button, and select
the flash mode. (P17)
≥
The flash working range is shown
on the display panel in line with the
settings of the digital camera.
A
: Flash working range
≥
If the settings on the digital camera
(ISO sensitivity and aperture) are
outside the combinations of the ISO
sensitivity and aperture which can
be adjusted, the flash working range
is not displayed and the user is
warned by the flashing of [ISO] and
[F] on the display. In a case like this,
change the digital camera settings.
1 Check that the distance to
the subject is within the
flash working range.
≥
If the subject is outside the range,
adjust the aperture of the lens or
change the distance to the subject.
≥
The flash working range changes
depending on the type and
settings (ISO sensitivity, aperture
and focal length) of the digital
camera used.
2 Press the shutter button
all the way down, and take
the picture.
3 Check that the [AUTO
CHECK] lamp is flashing.
≥
If the [AUTO CHECK] lamp
continues to flash for about
5 seconds, it means that the unit
has fired successfully. If it does not
flash, the unit has not fired
successfully. Check the settings
on the unit and the digital camera
and then take the picture again.
∫
Combinations of the ISO
sensitivity and aperture which
can be adjusted in the [AUTO]
mode
[AUTO]
A
ISO sensitivity
Aperture
3200
F8
to
F32
1600
F5.6
to
F32
800
F4
to
F32
400
F2.8
to
F32
200
F2
to
F32
100
F1.4
to
F22
50
F1.4
to
F16
25
F1.4
to
F11
AUTO CHECK
VQT1B11.book 20 ページ ２００６年８月３１日 木曜日 午後４時３６分
Summary of Contents for FL360 - DMW - Hot-shoe clip-on Flash
Page 194: ...194 VQT1B11 MEMO ...
Page 195: ...195 VQT1B11 MEMO ...
