7
Install filters
安裝過濾網
Front panel lock cover
SETUP
設置
接通電源
。
本產品操作面板為觸摸屏
，
使用時請使用手指儘量大面積接觸觸摸鍵(接觸面積過小
，
有可能導致觸摸後無反應)
。
前面板開關盒蓋
關閉前面板開關盒蓋
(
2
個)
。
前面板
如果產品運轉時斷電了
，
當再次來電時
，
產品將自動重啟並以斷電時的模式進行運轉
。
觸摸 鍵
，
空氣污染度指示燈閃爍約
5
秒
。
接通電源
，
PM2.5
濃度/定時顯示窗顯示
PM2.5
濃度
。
因為異味感應器以接通電源時的空氣潔淨度作為
基準
，
建議當室內空氣清潔時(如沒有煙味時)接
通電源
。
(異味感應器的基準會根據室內的空氣
清潔度自動更新
。
)
OPERATION
使用方法
Close the front panel lock cover (2 pcs).
Front panel
This product adopts touch screen operation, contact area is as large as possible when using finger
to press (if contact area is too small, may result in no response after touch).
If power is disconnected while operating, when it is connected again, the product will automatically
restart and operate in the mode it was in when power was lost.
press , and the “clean sign” blinks about
5 seconds.
Power on, PM2.5 concentration / timer
display window shows PM2.5 concentration.
When connecting power, the odor sensor
takes this moment as the baseline for the
level of cleanliness, so it is recommended
when the air in the room is clean (such as
when there is no cigarette smoke).
(the odor sensor baseline is updated
automatically depending on the level of
cleanliness in the room)
(
7
)
接通電源
Power-on
Power-on.
CONFIRMATION
AND SETUP
確
認
與
設
置
OPERATION
使
用
方
法
定時鍵
靜音自動鍵
風量鍵
運轉關/開鍵
PM2.5
鍵
Timer button PM2.5 button
Silent Auto button Air volume button
Power off/on button
Detectable area
Filter replace Filter clean
Auto
Light sensor
Human sensor
