Panasonic EY74A2, Operating Instructions Manual

Page: 17 / 152

- 17 -
EN
Information for Users on Collection and Disposal of Old Equip -
ment and used Batteries
These symbols on the products, packaging, and/or accompanying documents
mean that used electrical and electronic products and batteries should not be
mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batter
-
ies, please take them to applicable collection points, in accordance with your
national legislation and the Directives 2012/19/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save
valuable resources and prevent any potential negative effects on human health
and the environment which could otherwise arise from inappropriate waste
handling.
For more information about collection and recycling of old products and batter
-
ies, please contact your local municipality, your waste disposal service or the
point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance
with national legislation.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of disposal.
V. MAINTENANCE
• Use only a dry, soft cloth for wiping the unit.
Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.
• In the event that the inside of the tool or battery pack is exposed to water, drain and allow
to dry as soon as possible. Carefully remove any dust or iron filings that collect inside the
tool. If you experience any problems operating the tool, consult with a repair shop.
VI. ACCESSORIES
Use only bits suitable for size of drill’s chuck.
VII. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model No. EY74A2 EY79A2
Motor voltage 14.4 V DC 18 V DC 14.4 V DC 18 V DC
Screw driving Machine screw M5
Wood screw Φ 6.8 mm Φ 8 mm Φ 6.8 mm Φ 8 mm
Drilling Self-drilling screw Φ 6 mm
For Wood Φ 35 mm Φ 38 mm Φ 35 mm Φ 38 mm
For Metal Φ 13 mm
For Masonry — Φ 13 mm
EY74A2_EU.indb 17 2015/10/16 13:51:24