Panasonic EY3551 - 18V WOOD SAW, Specifications

Page: 5 / 17

Ref. No. 2B Procedure 2A → → → → 2B Removal of the shoe.
NOTE:
It is possible to disassemble the main unit without removing the
shoe.
1. Take out the E-ring and the depth adjustment lever.
2. Unscrew the hex nut.
3. Take out the spring washer and piling catahats washer.
4. Pull out the square screw and pipe.
5. Take out the stopper washer and toothed lock washer.
6. Push out the spring pin with a rod having a diameter of 5mm.
NOTE:
Do not tap the spring pin strongly. If to do so, the supporting
metal plates on both side of housing may cause the deformation.
Ref. No. 2C Procedure 2A
→
→ →
→
2C Removal of the Housing.
1. Loosen 7 housing screws (frearson type) and 1 (+) head screw.
It is then possible to disassembly the main unit or to check the
switch block and motor.
5
EY3551-X8 / EY3552-X8