background image

8

 - ENGLISH

Installation (continued)

<For PT-VW355N, PT-VW350, PT-VX425N, PT-VX420, PT-VX421; PT-VW360, PT-VX430, PT-VX431K>

A

A

Wire rope

Wire 

rope

Screw, captive 

washer

(M4 

x

 12)

Screw, captive 

washer

Note

 

z

For the position of A of the PT-VW355N, 

 

PT-VW350, PT-VX425N, PT-VX420, PT-VX421; 

 

PT-VW360, PT-VX430, PT-VX431K models, refer 

to the image on the left.

<For PT-LRZ35, PT-LRZ35U, PT-LRW35, PT-LRW35U>

A

A

Wire rope

Wire 

rope

Screw, captive 

washer

(M4 

x

 12)

Screw, captive 

washer

Note

 

z

For the position of A of the PT-LRZ35, PT-LRZ35U, 

PT-LRW35, PT-LRW35U models, refer to the image 

on the left.

Installing the bracket to the projector

Install the bracket to the projector (sold separately) by following the procedure below.

<

For PT-VZ585N, PT-VZ575N, PT-VZ580, PT-VZ570, PT-VW545N, PT-VW535N, PT-VW540, PT-VW530, PT-VX615N, 

PT-VX605N, PT-VX610, PT-VX600, PT-VX61K, PT-VX60, PT-VX51K, PT-VX50, PT-VMZ60, PT-VMZ50, PT-VMZ40, 

PT-VMW60, PT-VMW50, PT-VMZ601K, PT-VMZ501K, PT-VMZ401K, PT-VMW601K, PT-VMW501K / PT-VGZ601K>

Projector 

mount 

bracket

Captive washer 

screws (M4 × 10) 

Wire rope

The illustration is an example when it is attached to 

 

PT-VZ585N.

1   Pass the wire rope through the hole of the projector 

mount bracket as illustrated on the left.

  Secure the projector mount bracket to the bottom of 

the projector using the 4 supplied captive washer 

screws (M4 × 10) as illustrated on the left.

 

Wire rope

Summary of Contents for ET-PKV400B











Reviews: