background image

4

 - ENGLISH

Product description

This is a projector mount bracket for installing projectors.

 

Applicable ceiling mount brackets

ET-PKL100S (for low ceilings) / ET-PKL100H (for high ceilings)

Note

 

z

In this document, the alphabet letters at the end of the projector part numbers are omitted.

 

Structural components

Parts name

Form (number of parts)

Applications

Projector mount

 

bracket

× 1

This is used to install the projector 

itself. 

 

It has a function which allows 

 

adjustment of the left and right tilt.

Screws

Screw, captive washer (M4×10)

These are used to secure the 

brackets to the projector.

× 4

Projector drop-

prevention kit

Screw, captive washer (M4×12)

Prevents the projector from falling.

× 1

Wire rope 

[2.0 mm (3/32") wire diameter, 600 mm (23-5/8") length]

× 1

× 1

Wire rope for projector

Screw, captive 

washer (M4×12)

Flat washer

(M8)

[2.0 mm (1/8") wire diameter,

600 mm (1´11) length]

× 1

× 1

Flat washer

× 1

 

z

Store small parts in an appropriate manner, and keep them away from children.

 

z

Tightening torque for the screw is M4: 1.25 ± 0.2 N•m.

 

z

When tightening up the screws, use a tool such as a torque screwdriver. Do not use electric screwdrivers or 

impact screwdrivers.

Attention

 

z

Dispose of the packaging materials properly after taking the product out of it.

 

Note

 

z

The projector models listed below require three of the four supplied captive washer screws (M4 × 10) for 

 

installation.

 

Model: PT-VW355N, PT-VW350, PT-VX425N, PT-VX420, PT-VX421; PT-VW360, PT-VX430, PT-VX431K

Summary of Contents for ET-PKV400B











Reviews: