Panasonic ET-PKL100H Installation Instructions Manual Download Page 1 | Manualshive

Page: 1 / 14

background image

ENGLISH

Installation Instructions

Ceiling Mount Bracket (for High Ceilings)

Thank you for purchasing this Panasonic Product.

J

To customers

The “Installation Instructions” is intended for use by installation personnel. Be sure to employ certified

personnel to perform the installation. After installation, have the installation personnel return these “Installation

Instructions” to you, and save it for future use. When moving or removing the projector, give this “Installation

Instructions” to the installation personnel and have them perform the procedure.

J

To installation personnel

Carefully read the “Installation Instructions” and install this product correctly and safely.

Be sure to read through the section entitled “Read this first!” (page 3) before proceeding with the installation.

After installation, return these “Installation Instructions” to the customer.

TQZJ606-2

Model No.

ET-PKL100H

1
2
3
...
»

Summary of Contents for ET-PKL100H















Reviews:

No comments

Related manuals for ET-PKL100H

Brand: GCX Pages: 20

Brand: Wallbox Pages: 17

Brand: Milestone AV Technologies Pages: 16

Brand: K&M Pages: 2

Brand: NCR Pages: 19

IP Solutions VIP-581

Brand: Valcom Pages: 3

Brand: Hama Pages: 22

Gigant 00111380

Brand: Xavax Pages: 22

Brand: B-Tech Pages: 16

Brand: Viozon Pages: 2

Mountlogic BT7514

Brand: B-Tech Pages: 12

I-Beam Cantilever

Brand: Steel King Pages: 9

Brand: HAGOR Pages: 12

Brand: Xicom Pages: 20

Brand: W Box Technologies Pages: 20

Brand: Mecmesin Pages: 24

Brand: HAGOR Pages: 12

Brand: LDI Spaces Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands