background image

ENGLISH - 

3

Read this first!

CAUTION:

Only install a designated projector.

Only install using a designated method.

 

z

The projector may fall down and be damaged, and an injury may result.

Do not install the unit in a location that may impede projector ventilation.

 

z

A fire may result.

Do not hang from or hang objects on the projector or ceiling mount bracket.

 

z

The projector may fall and cause injury.

When installing, always use the supplied components.

 

z

The unit may be damaged, or the projector may fall down and an injury may result.

Install the mounting screws and power cable in such a way that they will not make contact with metal 

objects inside the ceiling.

 

z

Electric shocks may result from contact with any metal objects inside the ceiling.

Always follow these precautions

WARNING:

Installation work should only be carried out by the certified personnel.

 

z

If this product is not installed correctly, serious accidents may result.

 

z

Follow the instructions specified in “Installation” and "Installation of ceiling mount bracket drop-prevention 

kit" of this manual, and perform secure installation.

Install the ceiling mount bracket in accordance with the structure and materials of the installation 

location.

 

z

If a mistake is made in the installation procedure, the ceiling mount bracket may fall down and an injury may 

result.

Mounting and installation must be carried out by two or more persons.

 

z

When installing the projector in an overhead location, for example, in a high ceiling, at least two persons will 

be required to handle the installation.

Make sure that your footing is safe and secure during installation.

 

z

If your footing is not secure, you may fall down or drop the unit, and an injury may result.

Do not loosen or remove the unit screws and bolts unnecessarily.

 

z

The projector may fall down and an injury may result.

Do not install in a location that is not strong enough.

 

z

If the installation location is not strong enough, the unit may fall down and damage to the projector or an 

injury may result.

Do not install the ceiling mount bracket in humid or dusty locations or in locations where the ceiling 

mount bracket may come into contact with oily smoke or steam.

 

z

Using the projector under such conditions may result in fire or electric shock. Also, the oil will cause the 

plastic to deteriorate and the projector may fall down when installed on a ceiling.

Do not allow children to reach the supplied screws and metal fittings.

 

z

The supplied screws and metal fittings can cause personal injury if swallowed.

 

z

If swallowed, seek medical advice immediately.

Do not disassemble or modify the ceiling mount bracket.

 

z

The projector may be damaged or fall, causing injury.

 

r

Panasonic Connect Co., Ltd. takes no responsibility for any accident or damage caused by the 

installation of the ceiling mount bracket using methods that are not described or methods that do 

not use the parts specified in these Installation Instructions.

 

r

If products are no longer being used, they should be dismantled and removed by certified personnel 

as soon as possible.

Summary of Contents for ET-PKL100H















Reviews: