English
Important
Before use
This WET/DRY shaver can be used for wet shaving with shaving
lather or for dry shaving. You can use this watertight shaver in
the shower and clean it in water. The following is the symbol of
Wet shaver. The symbol means that the hand-held part may be
used in a bath or shower.
Treat yourself to wet lather shaves for at least three weeks and
notice the difference. Your Panasonic WET/DRY shaver requires
a little time to get used to because your skin and beard need
about a month to adjust to any new shaving method.
Using the shaver
Caution - The outer foil is very thin and can be damaged if not
used correctly. Check that the foil is not damaged before using
the shaver. Do not use the shaver if the foil etc. is damaged as
you will cut your skin.
Charging the shaver
Do not use any power cord or AC adaptor other than one
specifically designed for this model. Plug in the adaptor into a
household outlet where there is no moisture and handle it with
dry hands. The shaver may become warm during use and
charging. However, this is not a malfunction. Do not charge the
shaver where it will be exposed to direct sunlight or other heat
sources. Hold the adaptor when disconnecting it from the
household outlet. If you tug on the power cord, you may damage
it. Contact an authorized service center if the power cord gets
damaged.
Adequate ambient temperature for charging is 15-35 °C.
If the indicators on the LCD panel do not glow, wait for a short
while until it glows.
Cleaning the shaver
Warning - Disconnect the power cord from the shaver before
cleaning it to prevent electric shock.
Keep both the inner blades inserted. If only one of the inner
blades is inserted, the shaver may be damaged. If you clean the
shaver with water, do not use salt water or hot water. Do not
soak the shaver in water for a long period of time. Wipe it with a
cloth dampened with soapy water. Do not use thinner, benzine
or alcohol.
Storing the shaver
Disconnect the power cord when storing the shaver. Do not
bend the power cord or wrap it around the shaver. Do not leave
this shaver within the reach of small children. Keep these
operating instructions in a safe place.
SPECIFICATIONS
Power source: 100-40 V AC, 50-60 Hz
(Automatic voltage conversion)
Motor voltage: 3.6 V DC
Charging time: 1 hour
This product is intended for household use only.
Airborne Acoustical Noise:
In shaving mode: 65 (dB (A) re 1 pW)
In trimmer mode: 67 (dB (A) re 1 pW)
Summary of Contents for ES8103
Page 106: ...106 MEMO ...
Page 107: ...107 MEMO ...
