Panasonic EP-MAK1 Operating Instructions Manual Download

Page: 17 / 100

Screen displays during massaging operations

⁃

Press the displayed buttons to operate.

⁃

The power is turned OFF automatically if massage is not started and no operation is performed for about 3 minutes.

<Viewing screens>

The "Full body auto massage" course is used as an example for the screen displays shown below. Buttons and status

displays vary, depending on the selected course.

User display

• The selected user is displayed.

(EN22 to EN24)

• The display is not shown when

"Guest" is selected.

Returns to the previous screen

Displays the remaining time

Displays the operation

(

EN26)

Operations can be adjusted

(EN30 to EN34

Displays the course

(EN23 to EN25)

Settings button

(EN35)

Help button

(EN35)

• Settings button and Help button

are displayed regardless of the

selected course.

⁃

The display of body parts can be switched between upper half

of body and full body.

⁃

The display of body parts cannot be switched while the

program is being edited. (EN25)

⁃

The screen on the right is displayed when the

air course or operations for body parts that only

activates air is selected.

(See EN26 for regarding air massage.)

Sole

•

rotates during

operation.

Air

(Example: In case of air arm course)

Arm/Leg/Sole actions

Turning operations OFF/

ON, Intensity of actions

display (EN32 to EN33)

Setting of air: Off

Setting of air: On

Air operating

The color of the

body part changes

continuously.

Massage rollers

• The color becomes darker as

the pressure on the massage

rollers becomes higher.

Display of the operation, position, and pressure

⁃

The statuses of massage rollers in operation, as well as sole and air are displayed.

(The display indicates rough movements; actual movements or sensations may vary.)

Press

Part names and functions of the controller

EN17

Summary of Contents for EP-MAK1





































































































Search results

Summary of Contents for EP-MAK1

Reviews:

Related manuals for EP-MAK1

Brands by name

Popular brands

Panasonic EP-MAK1, Operating Instructions Manual

Search results

Summary of Contents for EP-MAK1

Reviews:

Related manuals for EP-MAK1

Brands by name

Popular brands