Panasonic Eco Solutions Nordic AB
MEW01624 Rev: -
EBL128 version 2.0.x, Daily user's manual
20
5.11
Disable / re-enable alert annunciation
function (B11)
Not available for users with access level / type "Information only".
Normal operation:
For alarm points / zones programmed for
A
lert
A
nnunciation (via
EBLWin) is normally the
AA
function enabled via a time channel, e.g.
enabled daytime (during working hours) and disabled night time.
As an alternative, the
AA
function can be continuously enabled.
Turned Off
Via this menu (B11) it is possible to disable the
AA
function, i.e. the
AA
function will be disabled for the alarm points / zones programmed
for
A
lert
A
nnunciation in spite of the time channel is "on" or if they
are programmed to be continuously enabled.
The
AA
function will stay disabled until re-enabled again via this
menu.
NOTE!
Disabled Alert Annunciation function is indicated by LED
"
Fault /
Disablements
Fire brigade tx delay" (L16) turned off.
Log in with a
User name
and
Password
for typ
Building officer
(or
Service personnel), see page 5.
H1 Perform monthly test
Scroll (or press
"2"
) to menu H2.
H2 Disable or re-enable
Press
"A"
to sub menu B1.
B1 Disable zone
Scroll to menu B11.
B11 Disable / re-enable alert annunciation function
Press
"A"
.
Alert annunciation function is in normal operation
or
Alert annunciation function turned off
will be shown.
Press
"A"
. The status changes.
Press
"Return"
(P9) to menu B11.
Scroll to another menu or press
"Return"
to menu H2. Scroll to
another menu or leave the menu system by pressing
"Return"
.
Summary of Contents for EBL128
Page 2: ...This page has deliberately been left blank...
Page 4: ...Panasonic Eco Solutions Nordic AB MEW01624 Rev EBL128 version 2 0 x Daily user s manual 2...
Page 40: ...Panasonic Eco Solutions Nordic AB MEW01624 Rev EBL128 version 2 0 x Daily user s manual 38...
