Panasonic EB-G50 Service Manual Download Page 6

Page: 6 / 91

– 2–1 –

2. GENERAL DESCRIPTION

2.1. General

This section provides a general description and kit composition details for the GSM Handportable Telephone System
and optional kits.

2.2. Features

The Panasonic Telephone Model G50 is a high performance, small, light, handset for business and domestic use.
The following features are provided:

Dual Codec, which includes Full Rate and Enhanced Full Rate (EFR) Speech Codec.

Triple Band, E-GSM 900 and PCS 1800 /1900 operation.

Tegic T9 Text Entry.

Voice Ringer.

Desktop handsfree function comprising integral echo cancellation and noise suppression.

Wireless Application Protocol (WAP) Browser.

Backup Battery.

Downloadable polyphonic melody ring tones.

Clock, Calculator and Currency Converter.

2.3. Handportable Main Kit

Figure 2.1: Handportable Main Unit Kit Contents

Main Unit

Battery

Travel Charger

Summary of Contents for EB-G50




























































































Search results

Summary of Contents for EB-G50

Reviews:

Related manuals for EB-G50

Brands by name

Popular brands

Panasonic EB-G50, Service Manual

Search results

Summary of Contents for EB-G50

Reviews:

Related manuals for EB-G50

Brands by name

Popular brands