– 8–7 –
There are two parts in this test item.
(1) TX POWER SCALING FACTOR
1. Click [Read] to read the values inside the handset as reference.
2. Select "BANDMODE", EGSM_DCS for 900/1800, EGSM_PCS for 1900
3. Enter the ARFCN of each middle band-> click [APPLY] (ex: EGSM–37) and set tester in the same
channel.
4. Enter the estimate value in SCALING FACTOR -> click [APPLY] and read the TX output power value
on the tester. Repeat until the TX power is within the allowed range.
5. Repeat step 2-4 for the other bands which are optional.
6. Click [WRITE] when the chosen bands are all tested to adjust the handset.
1
2
4
3
6
