6
RQT8697
Preparations
1
Attaching the battery
(When the unit is off)
An optional battery pack (CGR-H713) is also available. The procedure for attaching and
detaching is the same.
Detaching
≥
Turn the unit off before detaching the battery pack.
When not using for long periods of
time
≥
Remove the battery pack (
➜
left).
(Even when the unit is turned off, there is a
small amount of voltage running through the
unit, and this may result in a malfunction.)
≥
Recharge the battery for re-use.
Clicks into place
Check to make sure it is securely fastened.
Bottom side of this unit
Battery pack
RELEASE
DETACH
ATTACH
Press and hold
DC IN
DC I
N
12
V
To household
mains socket
AC adaptor
(included)
AC mains lead
(included)
≥
You can also use this unit without charging while
connecting the AC adaptor and the AC mains lead.
≥
You can also use this unit without charging while
connecting Car DC Adaptor (
➜
page 24, Connecting
the included Car DC Adaptor).
To conserve power
This unit consumes 0.3 W of power even when turned
off. When the unit is not going to be used for a long time,
disconnect the AC mains lead from the household mains
socket.
The unit is in the standby condition (the [
Í
] indicator
lights) when the AC mains lead is connected. The
primary circuit is always “live” as long as the AC adaptor
is connected to an electrical outlet.
2
Recharging the battery
(When the unit is off)
[
Í
]
goes
out
➜
lights
[CHG]
lights
➜
goes out
Recharging time:
[DVD-LS91]
:
Approx. 4 hours
(CGR-H701, included)
[DVD-LS912]
:
Approx. 8 hours
(CGR-H712, included)
Approx. 10 hours
(CGR-H713, optional)
When finished, disconnect the AC
adaptor and the AC mains lead.
Í
CHG
Started
Finished
Pre
parat
ions
p2‑31.fm Page 6 Thursday, February 23, 2006 12:25 PM
