83
Setup menus
<BASIC>
*1
When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*The underlining (__) denotes the factory setting mode.
No./Item
Description of setting
000
P-ROLL TIME
For setting the preroll time. Any time from 0 to
30 seconds can be set in 1-second increments.
0000
0s
:
:
0005
5s
:
:
0030
30s
<Notes>
z
During automatic editing (PREVIEW or AUTO
EDIT), no operations are performed if the preroll
time is set to 0 seconds.
z
If the phases are to be synchronized between
two decks for editing as per the setup menu item
No.004 (SYNCHRONIZE) setting, set the preroll
time to at least 2 seconds.
001
LOCAL ENA
For selecting the transport system buttons
which can be operated on the front panel in the
REMOTE mode.
0000
DIS
No buttons can be operated.
0001
ST&EJ
Only the STOP and EJECT buttons can be oper-
ated.
0002
ENA
ll the buttons except for the RECORDER and
PLAYER buttons can be operated.
<Note>
The following buttons and dials function at all
times regardless of this setting:
Audio input/output level control dials, audio
channel selector buttons, number keys, function
buttons, direct menu button, ASSEM button,
INSERT button, ADJ dial, headphone volume
control dial, MONITOR SELECT button, METER
(FULL/FINE) selector switch, REMOTE button.
002
*1
TAPE TIMER
For selecting the 12- or 24-hour system for the
CTL counter display.
0000
±12h
12-hour system display
0001
24h
24-hour system display
003
REMAIN SEL
For selecting whether or not to display REMAIN
(remaining tape time) on the superimposed
display of the HD SDI MONITOR, SD SDI
MONITOR and VIDEO OUT3 connectors.
0000
OFF
The remaining tape time is not displayed.
0001
2L
The remaining tape time is displayed on the sec-
ond line.
0002
1L
The remaining tape time is displayed on the first
line.
0003
R/TTL
The remaining tape time is displayed on the first
line, and the total tape time is displayed on the
second line.
<Notes>
z
When setting 1 (2L) has been selected, the
remaining tape time is not displayed if 0 (TIME)
is selected as the setup menu item No.006
(DISPLAY SEL) setting.
z
When setting 3 (R/TTL) has been selected, the
remaining tape time is not displayed if 0 (TIME)
is selected as the setup menu item No.006
(DISPLAY SEL) setting.
No./Item
Description of setting
004
*1
SYNCHRONIZE
For setting whether or not to synchronize the
phases between two decks.
0000
OFF
The phases are not synchronized. The edit
points will be off by several frames but editing will
be commenced more promptly.
0001
ON
The phases are synchronized. Error-free editing
can be performed.
005
SUPER
For selecting whether or not to superimpose
the display of the time code or other data onto
the HD SDI MONITOR, SD SDI MONITOR and
VIDEO OUT3 connectors.
0000
OFF
The time code or other data is not displayed.
0001
ON
The time code or other data is displayed.
<Note>
z
The 1394 output follows the settings in Setup
Menu No. 899 (DIF SUPER).
z
When the 23/24 Hz mode, 25 Hz (HD) mode, or
50 Hz (HD) mode is selected in System Menu
No. 25 (SYSTEM FREQ), supers, such as time
codes, are not displayed on the SD SDI
MONITOR/VIDEO OUT 3 connector. When the
25 Hz (SD) mode or 50 Hz (SD) mode is
selected, supers, such as time codes, are not
displayed on the HD SDI MONITOR connector.
006
DISPLAY SEL
For selecting the time code and other displays
to be superimposed onto the HD SDI MONITOR,
SD SDI MONITOR and VIDEO OUT3 connectors.
In the following descriptions, [DATA] refers to the
values for CTL/TC/UB selected in
(TC/CTL).
0000
TIME
Only data are displayed.
0001
T&STA
Data and operating conditions are displayed.
0002
T&S&M
Data, operating conditions, and the mode are
displayed
0003
T&RT
Data and REC TIME are displayed.
0004
T&YMD
Data and REC DATE (Year/Month/Day) are
displayed.
0005
T&MDY
Data and REC DATE (Month/ Day/Year) are
displayed.
0006
T&DMY
Data and REC DATE (Day/Month/Year) are
displayed.
0007
T&UB
Data and user bits are displayed.
However, when UB is selected in
(TC/CTL)
of the HOME menu, the time code is displayed
immediately after user bits.
0008
T&CTL
Data and CTL are displayed.
However, when CTL is selected in
(TC/CTL)
of the HOME menu, the time code is displayed
immediately after CTL data.
0009
T&T
Data and the time code are displayed.
<Notes>
z
When setting 2 (T&S&M) is selected, an error
message appears if a warning or error has
occurred.
z
REC TIME and REC DATE are displayed only
during DV or DVCAM format playback. The
operation mode is displayed when the DVCPRO
HD-LP, DVCPRO HD, DVCPRO50 or DVCPRO
format is used.
F3
F3
F3
