61
Function menus
(continued)
<INSERT>
The INSERT editing mode and editing channels are selected
on this menu screen.
Registering the edit points
After the edit IN and OUT points have been registered, the
and
buttons light.
Automatic editing and manual editing
z
When the editing mode has been selected (the
button is lighted), automatic editing or manual editing can
be performed even after the INSERT screen has been
exited.
z
After the edit IN and OUT points have been registered (the
and
and
buttons are lighted), the tape can be
prerolled to an IN point or cued up to an IN or OUT point
even after the INSERT screen has been exited.
F1
SHIFT
F2
F3
F4
F5
F6
Marker
OUT point
IN point
AUDIO IN point
AUDIO OUT point
IN
OUT
INSERT
IN
OUT
Function button/
item
Switching
method
Setting
Corresponding setup
menu item
Description of setting
F1
V
Toggle
___
___
For setting the editing mode to ON or OFF and
selecting the editing channels.
With the exception of the function button (F1), two
channels are allocated.
Use the SHIFT button to move the marker up or
down, and while specifying the channels, press the
function buttons to select them. Pressing the SHIFT
button on other screens serves a different purpose
(screen switching) from its use here.
For setting the editing mode to ON or OFF.
When one of the channel displays is highlighted, the
INSERT editing mode is set to ON, and the INSERT
button lights.
F2
A5, A1
F3
A6, A2
F4
A7, A3
F5
A8, A4
F6
TC, CUE
