6
Parts and their functions
1
Microphone intercom switch (MIC)
Used to switch the intercom line between the ON, OFF, and
PTT settings. (PTT: Audio transmission continues as long as
the switch is held down.)
2
Intercom level knob (LEVEL)
This knob is used to adjust the intercom reception volume
level.
3
Program level knob (PGM)
This knob is used to adjust the intercom PGM volume level.
4
Program line switch
This switch controls the program line multiplexed on the
intercom line. It has two positions: ON and OFF.
AJ-
Camera Adapter
MIC
LEVEL
INCOM
PGM
ON
OFF
ON
OFF
PTT
DIGITAL TRIAX
1
2 3
4
Left side
3
Triax connector
This connector is used to connect to the base station (AJ-
BS901) using a triax cable.
1
Prompter video output (PROMPT OUT)
The prompter video signal input to the base station (AJ-
BS901) is output from this jack.
2
Return video output (RET OUT)
The return video signal (either RET1 or RET2) input to the
base station (AJ-BS901) is output from this jack.
RET-1 or RET-2 is selected by operating the return select
button (see page 5).
PROMPT
OUT
RET OUT
1
2
3
Right side
