5
RET 1
RET 2
INCOM
PUSH
PUSH
PGM OUT
CALL
RET SW
DC 12V IN
DC OUT
1
2
4
5
6
7
8
9
500mA
12V
3
Parts and their functions
1
Return select button (RET1)
This button is used to select the return signal generated when the return switch is pressed. This button selects
RET1.
2
Return select button (RET2)
This button is used to select the return signal generated when the return switch is pressed. This button selects
RET2.
3
Call lamp
This lights when t
he camera recorder has been called up by the base station (AJ-BS901) or when R TALLY
has been set to
ON.
4
CALL button
This button is used to call the base station (AJ-BS901) from the camera adapter. Pressing the CALL button
causes the CALL lamp on the AJ-BS901 to light.
5
Return switch jack (RET SW)
This jack connects to RET SW BOX. Supported functions are RET1 and RET2 selection as well as intercom
PTT (push to talk) and CALL.
Rear panel
7
DC OUT (DC power supply output) jack
This is a DC 12 V output jack. A current up to 500 mA can be output from this jack.
6
DC 12V IN (external power supply input) jack
When the unit is operated using an external power supply, the AJ-B95 AC adapter (sold separately) connects
to this jack. It is also possible to connect an external battery to this jack.
When connection is made to this jack, the external power supply is selected automatically.
<Note>
When the AJ-CA901 camera adapter (this unit) has been installed, the camera recorder unit is set to EXT DC
IN mode. When the battery warning is displayed, select the type of battery for detecting the remaining charge
in EXT DC IN SELECT of BATTERY/TAPE in the VTR menu of the camera recorder.
8
Intercom connector
This connecter is used to connect to an intercom system via the AJ-BS901 for two-way voice connections.
9
PGM OUT connector
This is the PGM audio output connector.
