Panasonic DP-MB350 Operating Instructions Manual Download Page 68

Page: 68 / 120

9. Programmable Features

Setting the paper input tray
prompt for copy

{#}{

}{

}

This feature will be displayed only when the lower input tray is installed (page
79).

{

}

“

Off

”: Deactivates this feature.

{

}

“

Auto

” (default): When making a copy, you will be prompted to select the

desired paper input tray if the recording paper size setting is different for the
standard input tray (feature #380 on page 59) and the lower input tray (feature
#382 on page 59).

{

}

“

Always

”: When making a copy, you will always be prompted to select the

desired paper input tray.

Note:

When prompted, select the desired paper input tray by pressing

{

}

{

}

repeatedly, then press

{

Start

}

Even if “

Auto

” or “

Always

” is selected, this feature will not be activated if

the recording paper type setting (feature #383 on page 60) is set to “

Thick

Paper

”. Change the setting to “

Plain Paper

” or “

Thin Paper

”

beforehand.

Feature/Code

Selection

Summary of Contents for DP-MB350

























































































































Search results

Summary of Contents for DP-MB350

Reviews:

Related manuals for DP-MB350

Brands by name

Popular brands

Panasonic DP-MB350, Operating Instructions Manual

Search results

Summary of Contents for DP-MB350

Reviews:

Related manuals for DP-MB350

Brands by name

Popular brands