manualshive.com logo in svg

Panasonic DP-8020E, Service Manual

Share
Download
Panasonic DP-8020E Service Manual Download Page 326

326

SEP 2006

Ver. 1.0

DP-8020E/8020P/8016P

7.3.2. Setting the Default Destination (For Europe and Other Destinations only)

1. Press "

V

" or "

/\

" arrow keys to select the desired destination.

2. Press the "

Set

" key.

3. Press the "

1

" key for YES.

After the machine has warmed up, it displays:

4. Turn the Power Switch on the Right side of the machine to the 

OFF

, and back to the 

ON

 position.

(31) Plug the 

AC Power Cord

, and turn the Power 

Switch on the Right Side of the machine to the 
ON position.

Note:

Perform the following adjustments after the 
machine has warmed up, and displays:

<For USA / Canada etc> (Skip to Sect. 7.3.3.)

<For Europe and Other Destinations only>

Note:

The contents in the (**) *** in the LCD display 
above may differ depending on the destination.

READY TO COPY

COPIES:001

DP-8020E (**)       ***

DESTINATION CODE :
PRESS \/ /\ TO SELECT

READY TO COPY

COPIES:001

Summary of Contents for DP-8020E



















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands