Gettin
g started
TQBS0037
17
The tuner in this unit is compatible with digital
Cable broadcast services and digital terrestrial
broadcast services.
• In these operating instructions,
[DVB-C]
: indicates features applicable to digital
cable broadcasts (DVB-C).
[DVB-T]
(
[DVB-T2]
): indicates features applicable
to digital terrestrial broadcasts (DVB-T).
[Switchover from DVB-T to DVB-T2 is
scheduled. (Germany only)]
• This unit can receive only one of the two
services at a time.
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
3
Select language, then press [OK].
4
Select country, then press [OK].
5
Set “TV Signal Selection”.
• Select “Digital Cable Channels” or “Digital
Terrestrial Channels”, then press [OK].
8
Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
[UBC80]
Easy Setting
2
Press [
Í
] on the remote control or [
Í
/I] on
this unit.
• The Easy Setting will start at the initial
power on.
1
[DVB-C]
Select the channel number allocation,
then press [OK].
• For Germany and Austria:
We recommend selecting “Preset
Channel Number”.
• For Switzerland:
We recommend selecting “Operator’s
Channel Number ( LCN )”.
• To change channel allocation, restart Auto Setup
in Basic Settings menu and change channel
number allocation selection. (
>
86)
• If channel is not found, restart Auto Setup in Basic
Settings menu. (
>
86)
• Switchover from DVB-T to DVB-T2 is scheduled.
After switchover to DVB-T2, perform Update
Channel List to update channels. (Germany only)
2
[DVB-C]
Select “Start Auto Setup”, then press
[OK].
• Scan Mode
Quick
Full
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
• Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
6
Auto Setup will start automatically.
(This operation may take some time.)
[DVB-C]
When tuning is completed, press [OK].
7
Clock will be set automatically.
If the clock setting screen appears, set the
time manually (
>
98, Clock).
DMR-UBC&UBS80EG_eng.book 17 ページ ２０１７年３月２日 木曜日 午後７時１２分
