∫
Helpful Hints
68
PDC
PDC (Programme Delivery Control)
Programme Delivery Control adjusts the start and stop time of a
timer recording automatically to ensure the recording starts and
finishes in line with the programme broadcast. This is useful when
a programme over-runs the published times.
The station must be transmitting PDC and the exact time must be
set for PDC to work.
The unit detects whether a station is transmitting PDC only during
the tuning process.
If PDC is introduced or discontinued by a station you will need to
re-tune the unit before it becomes aware of this.
PDC transmissions are not currently nation-wide so please check
with your local broadcaster for more information.
The beginnings of recordings may not be recorded correctly in
some cases.
Title/Chapter (DVD-Video)
DVD-Video are divided into large sections (titles) and smaller
sections (chapters). The numbers allocated to these sections are
called title numbers and chapter numbers.
Example
(1) Title 1
(2) Title 2
(3) Chapter 1
(4) Chapter 2
(5) Chapter 3
Track
This is the smallest division on CD, and Video CD.
Example
(1) Track 1
(2) Track 2
(3) Track 3
(4) Track 4
(5) Track 5
On the unit’s display
(1)
(2)
(3)
(4)
(3)
(4)
(5)
(1)
(2)
(3)
(4)
(5)
Error messages
Indications
Unit status
Solutions
Page
NO READ
The disc is dirty or badly scratched.
≥
Follow the instructions in “Maintenance and Handling” to clean the disc if it is
dirty.
≥
The disc is not available if it is scratched and this display doesn’t disappear.
66
–
It can not be read for the disc which
doesn’t cope with it.
≥
Exchange a disc.
–
The DVD-RAM/PD lens cleaner
has finished cleaning.
≥
Take the cleaner out of the unit.
–
UNSUPPORT
You have inserted a disc the unit
cannot play or record on.
≥
Insert a disc the unit can play or record on.
9
U14
The unit is hot.
≥
The unit switches to standby automatically for safety reasons and cannot be
operated. Wait for about 30 minutes for the service number to disappear.
≥
Select a position with good ventilation when installing the unit.
≥
Do not block the cooling fan on the rear of the unit.
–
–
–
U99
The unit fails to operate properly.
≥
Press [
Í
/I] to switch the unit to standby. Now press [
Í
/I] again to turn the
unit on.
–
REMOTE
DVD
The remote control and main unit
are using different codes.
≥
Change the code on the remote control or main unit.
62
SELF
CHECK
A power failure occurred or the AC
mains plug was disconnected while
the power was ON. However, self
check is also activated when this
unit is normally turned on.
≥
The unit is carrying out its recovery process. Wait until the message
disappears.
–
HDD SLEEP
The HDD is paused to extend its
lifetime.
≥
Press [HDD] to start.
–
DVD(B).book 68 ページ 2003年8月5日 火曜日 午後3時30分
Summary of Contents for DMR-E100H
Page 75: ...75 ...