Panasonic DMR-E100H Operating Instructions Manual Download

Page: 60 / 76

∫

Various Setting

Underlined items are the factory presets.

Picture

Rec Resolution

Select the picture sharpness when recording.

[Fine]

[Normal]

≥

This setting is fixed with “Fine” if you set “TV System” to “NTSC”.

Hybrid VBR Resolution

Switch between automatic and fixed hybrid VBR resolution when
recording.

[Automatic]

[Fixed]

Still Mode

Select the type of picture shown when you pause play.

[Automatic]

[Field]

[Frame]

Seamless Play

You can select the picture quality on the seams of the scenes in
the play list.

[On]

[Off]

Sound

PLAY

1.3 & Audio during Search

[HDD]

[RAM] [DVD-R] [DVD-A] [DVD-V]

[VCD]

(page 21)

Choose whether to operate the Quick View (Play

1.3) or not and

whether to have sound during search.

[On]

[Off]

[DVD-A]

≥

You may hear sound regardless of this setting with some discs.

Dynamic Range Compression

[DVD-V]

(Dolby Digital only)

Change the dynamic range for late night viewing.

[On]

[Off]

Bilingual Audio Selection

Select the type of audio in bilingual broadcasting. (page 27)

≥

When recording/dubbing to DVD-R

≥

When recording/dubbing in LPCM or MPEG4

[M1]

[M2]

≥

The bilingual audio cannot be switched in this unit in the following
cases.
- When recording audio from an external input to DVD-R.
- When SD VIDEO (MPEG4) is simultaneously recorded from the

external input.

Digital Audio Output

(Press [ENTER] to show the following settings. To return to the
previous screen, press [RETURN].)

PCM Down Conversion

(page 58)

Choose whether to convert 96 kHz LPCM signals to 48 kHz/16
bit.

[On]

[Off]

≥

Select “On” when using a copyright protected disc, since the
audio output does not work.

Dolby Digital

Choose whether to output Dolby Digital bitstream signals for
decoding on other equipment or to convert them to PCM
signals for 2-channel output.

[Bitstream]

[PCM]

DTS

Choose whether to output DTS bitstream signals for decoding
on other equipment or to not.

[Bitstream]

[Off]

MPEG

Choose whether to output MPEG bitstream signals for
decoding on other equipment or to convert them to PCM
signals for 2-channel output.

[Bitstream]

[PCM]

Set “Dolby Digital” to “PCM”, “DTS” to “Off” and “MPEG” to
“PCM” if the other equipment doesn’t have decoders. Incorrect
settings can cause noise to be output which can be harmful to
your ears and speakers, and audio will not be recorded properly
to digital recording equipment.

Audio Mode for XP Recording

Choose the audio type when recording with XP mode.

[Dolby Digital]

[LPCM]

≥

Even if “LPCM” is set, sound becomes “Dolby Digital” in
recording mode other than XP mode.

Audio Mode for DV Input

You can select the kind of sound when recording from the unit’s DV
terminal. (page 55)

[Stereo 1]

[Stereo 2]

[Mix]

Fine

Pictures become clear and vivid. Normally, use this
setting.

Normal

Select it when recording noisy pictures.

Automatic

The unit automatically switches resolution during
recording according to the image. The unit reduces
block noise, which occurs during MPEG
compression, by selecting the optimum rate.

Fixed

The resolution is fixed to ensure the resolution rate
is not reduced.

Field

Still pictures are less blurred. Select if jittering
occurs when “Automatic” is selected.

Frame

Sharper frame stills are obtained. Select if small text
or fine patterns cannot be seen clearly when
“Automatic” is selected.

The scenes in play lists created with this unit are
played seamlessly. This may cause shifting of the
points where scenes change. Some play lists
cannot be played seamlessly.

≥

Seamless Play does not work with programmes
recorded in different audio or when using Quick
View.

Off

The points where scenes in play lists are played
accurately, but this may cause the picture to freeze
for a moment when scenes change.

Bitstream

When you have connected a unit with a built-in
Dolby Digital decoder.

PCM

When you have connected a unit that doesn’t have
a built-in Dolby Digital decoder.

Off

When you have connected a unit that doesn’t have
a built-in DTS decoder.

Bitstream

When you have connected a unit with a built-in DTS
decoder.

Bitstream

When you have connected a unit with a built-in
MPEG decoder.

PCM

When you have connected a unit that doesn’t have
a built-in MPEG decoder.

Stereo 1

Records sound (L1, R1) when DV recording is
taking place.

Stereo 2

Records added sound such as narration (L2, R2)
subsequent to original recording.

Mix

Records both Stereo 1 and Stereo 2.

≥

L2 are recorded in L and R1

R2 are

recorded in R. In the case of bilingual broadcast,
Stereo 1 is recorded when recording to DVD-R or
if recording in LPCM. Details of recording are
given in “Bilingual Audio Selection” (See above).

DVD(B).book 60 ページ２００３年８月５日火曜日午後３時３０分