Panasonic DMR-BW500EF, Service Manual

Page: 55 / 114

55
10.2. Caution for Replacing Parts
10.2.1. Items that should be done after replacing parts
* Note2:
Version up please improve in HDD exchange latest firm afterward.
10.2.2. Notice after replacing Digital P.C.B. or BD Drive
Formatting the HDD is unnecessary after replacing Digital P.C.B. or BD Drive.
[TM AV1] is displayed, once power OFF, and power ON again.
10.3. Standard Inspection Specifications after Making Repairs
After making repairs, we recommend performing the following inspection, to check normal operation.
Use the following checklist to establish the judgement criteria for the picture and sound.
No. Procedure Item to Check
1 Turn on the power, and confirm items pointed out. Items pointed out should reappear.
2 Insert RAM disc. The Panasonic RAM disc should be recognized.
3 Enter the EE (TU IN / AV IN - AV OUT) mode. No abnormality should be seen in the picture, sound or operation.
4 Perform auto recording and playback for one minute using the RAM
disc. No abnormality should be seen in the picture, sound or operation.
*Panasonic DVD-RAM disc should be used when recording and
playback.
5 Model with the HDD: Perform auto recording and playback for one
minute using the HDD. No abnormality should be seen in the picture, sound or operation.
6 If a problem is caused by a VCD, DVD-R, DVD-Video, Audio-CD, or
MP3, playback the test disc. No abnormality should be seen in the picture, sound or operation.
7 Models with SD Card Slot or DV Input Jack or USB Input Jack: In
case of that the trouble is caused by SD card and/or DV terminal
and / or USB terminal. Models with SD Card or DV Input Jack;
1) SD Card: Check to be able to display and copy the picture.
2) DV terminal: Check to be able to record from DVC.
3) USB terminal: Check to be able to display and copy the picture.
8 After checking and making repairs, upgrade the firmware to the lat-
est version. Make sure that [FIRM_SUCCESS] appears in the FL displays.
*[UNSUPPORT] display means the unit is already updated to new-
est same version. Then version up is not necessary.
9 Transfer [9][9] in the service mode setting, and initialize the service
settings (return various settings and error information to their
default values. The laser time is not included in this initialization). Make sure that [CLR] appears in the FL display.
After checking it, turn the power off.
Item Contents Check Item Contents Check
Picture
Block noise
Sound
Distorted sound
Crosscut noise Noise (static, background noise, etc.)
Dot noise The sound level is too low.
Picture disruption The sound level is too high.
Not bright enough The sound level changes.
Too bright
Flickering color
Color fading