Panasonic DMR-BW500EF, Service Manual

Page: 21 / 114

21
7.1.2. Special Modes Setting
UNFOR-
MAT Unformatted disc error You have inserted an unformatted DVD-
RAM or DVD-RW that is unformatted or
recorded on other equipment.
The character indication flows side-
ways.
IR ERR IR communication error [IR ERR] is displayed when communication
between Timer microprocessor and IR
microprocessor fails. No display
No REC Recording is impossible [No REC] is displayed when recording is
impossible due to the defect, dirt or wound
of media. No display
HDD
ERROR [HDD ERR] is displayed when
start up of HDD was failed.
(Except error of setting of
Power on Stand-by) a) When normal start up was failed.
b) When start up at HDD boot was failed.
c) When start up from state of P-OFF was
failed.
d) When start up from state of HDD SLEEP
was failed.
[HDD ERR] is displayed when above each
start up of HDD was failed.
*In case b), tray opens automatically and
[HDDERR] is displayed until version up
disc is inserted. No display
HDD NG Power on Stand-by setting
error [HDD NG] is displayed when power on
Stand-by setting of HDD is NG or when
HDD which power on Stand-by is not set to
is used.
Please try to replace HDD with genuine
HDD as service parts. No display
Item FL display Key operation
Mode name Description Front Key
Rating password The audiovisual level setting password is
initialized to “Level 8”. Open the tray, set DRIVE SELECT
to DVD, and press [REC] and
[PLAY] simultaneously for 5 sec-
onds.
Service Mode Setting every kind of modes for servicing.
*Details are described in “
7.1.3. Service
Mode at a glance ”.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is
ON, execute " Forced disc eject " after
releasing Timer REC or EXT-LINK.
*This command is not effective during "Child
lock" is ON.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted. The display before execution leaves. When the power is off, press
[STOP] and [CH UP] keys simulta-
neously for 5 seconds.
Child lock/unlock Set or release “Child Lock”. Press [ENTER] and [RETURN] by
remote controller simultaneously
until [X-HOLD] is displayed.
Error Code Diagnosis contents Description Monitor Display Automatic FL display