With Other Equipment
VQT4W69
79
Registering the external HDD (USB HDD)
§
“For recorded titles (
>
9)” only
If you intend to move recorded titles to a
USB HDD, the USB HDD must be registered to
this unit first.
Limitation information
• A USB HDD with a capacity of less than 160 GB
cannot be used.
• Registering of a USB HDD will format the
USB HDD and all the content already recorded
will be deleted.
• Up to eight USB HDDs can be registered on this
unit.
• Registered USB HDDs cannot be used with
devices other than this unit.
• Certain non-confirmed USB HDDs cannot be
used with this unit.
• If a problem occurs with the USB HDD, please
contact the manufacturer of the device.
Connect this unit with optional USB HDD.
• Only one USB HDD (For recorded titles,
>
9)
can be connected at the same time.
• Do not connect additional HDDs using a USB
hub.
• For details about connection method, refer to
the instructions supplied with the USB HDD.
Please use the following procedure to disconnect.
Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.
1
Press [FUNCTION MENU].
2
Select “Basic Settings” in “Setup”, then press
[OK].
3
Select “Settings for USB HDD” in “HDD /
Disc / USB HDD”, then press [OK].
4
Select “USB HDD Disconnection”, then
press [OK].
5
Select “Yes”, then press [OK].
6
Disconnect the USB HDD from this unit.
Regarding the external HDD (USB HDD)
Please use a confirmed USB HDD.
For the latest information on confirmed USB
HDDs, please check the following website.
http://panasonic.jp/support/global/cs/
§
Connecting the USB HDD
Disconnecting the USB HDD
LNB 13V/18V 400mA max
IN 1
IN 2
This unit’s rear panel
e.g.,
USB HDD
DMR-BST835_735_730EG_eng.book 79 ページ 2013年7月1日 月曜日 午後4時51分