![background image](http://html2.mh-extra.com/html/yamaha/dvd-s2500/dvd-s2500_manual_3163884001.webp)
Partner: Yamaha
Model: DVD-S2500
Device Type: DVD Player
GENERAL INFORMATION
SIMPLWINDOWS NAME:
Yamaha
DVD-S2500
CATEGORY:
Transport Decks
VERSION:
1.0
SUMMARY:
This module will control the Yamaha DVD-S2500.
GENERAL NOTES:
This module will control most of the DVD-S2500’s “runtime” functions. When
any command is sent to the receiver, this module will acknowledge that the
command was processed and the corresponding feedback will be reflected at
the outputs of this module.
NOTE:
This module depends on feedback from the device. You cannot
comment out the FROM_DEVICE$ serial input. This serial signal must be used
for proper module operation. Some functions of this module will not operate in
certain modes. Please review manufacturer’s manual for more details.
CRESTRON HARDWARE REQUIRED:
CNXCOM-2, ST-COM, C2-COM
SETUP OF CRESTRON HARDWARE:
RS232
Baud: 9600
Parity: N
Data Bits: 8
Stop Bits: 1
H/W Hand Shaking: RTS/CTS
VENDOR FIRMWARE:
N/A
VENDOR SETUP:
NONE
CABLE DIAGRAM:
CNSP-532